Search keyword:Thermal Protector,Thermostatss,Exhaust Temperature Exhaust Temperature Controller...
Model Item | TP1 Series | TP2 Series |
Temperature Stability | Good stability, measurement repeatability +/-1 °C | Good stability, measurement repeatability +/-1 °C |
Temperature Range | 60~160°C | 45~140°C |
Temperature Tolerance | +/-5°C | +/-5°C |
Contact Configuration | Double pole and single Throw type; Two pairs of composite silver nickel contacts have low contact pressure and unstable contact resistance at low temperatures. | Single pole and single throw type; A pair of gold-plated silver nickel contacts with strong oxidation resistance and more stable contact, especially suitable for low-voltage DC circuits. |
Contact Resistance | 9~15mΩ | 8~12mΩ |
Insulation Resistance | Insulation resistance between wire and insulator≥100MΩ (DC500V) | |
Compressive Strength | Withstand AC1500V between the wire and the insulator (leakage current: 5mA), lasting for 1 minute without any breakdown or flickering phenomenon. | |
Moisture Resistance Test | Thermal protector is placed in a constant temperature oven at 40 +/-3 °C and a relative humidity of 90-95% for 48 hours, and the insulation resistance between the wire and the outer cover is above 10M Ω. | |
Durability | Under rated voltage and current conditions, thermal protector can turn on and off normally after 10,000 actions of the product caused by an external heat source. | |
External Pressure | Can withstand plane pressure of 100N, no change in performance (Metal shell) | The plane pressure should not exceed 50N (Plastic shell) |
Certification | GB14536.1-2008; GB14536.3-2008 UL2111-1997; EN60730-2-2:2008 | GB14536.1-2008; GB14536.10-2008; UL2111-1997; UL873-2001; EN60730-2-2:2008; EN60730-2-9:2008 |
Installation Thickness | 6.0mm | 3.8mm |